annotations: []
nodes:
  - boot_disk_size: null
    configuration:
      - name: ios_config.txt
        content: |-
          Building configuration...

          Current configuration : 3113 bytes
          !
          ! Last configuration change at 18:15:41 UTC Mon Apr 28 2025
          !
          version 15.9
          service timestamps debug datetime msec
          service timestamps log datetime msec
          no service password-encryption
          !
          hostname Host
          !
          boot-start-marker
          boot-end-marker
          !
          !
          no logging console
          !
          no aaa new-model
          !
          !
          !
          mmi polling-interval 60
          no mmi auto-configure
          no mmi pvc
          mmi snmp-timeout 180
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          no ip domain lookup
          ip cef
          no ipv6 cef
          !
          multilink bundle-name authenticated
          !
          !
          !
          !
          !
          redundancy
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          interface GigabitEthernet0/0
           description ** to R2 **
           ip address 10.1.0.1 255.255.255.252
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/1
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/2
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/3
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          ip forward-protocol nd
          !
          !
          no ip http server
          no ip http secure-server
          ip route 0.0.0.0 0.0.0.0 GigabitEthernet0/0 10.1.0.2
          !
          ipv6 ioam timestamp
          !
          !
          !
          control-plane
          !
          banner exec ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner incoming ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner login ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          !
          line con 0
           exec-timeout 0 0
           escape-character 81
          line aux 0
          line vty 0 4
           exec-timeout 0 0
           login
           transport input none
          !
          no scheduler allocate
          !
          end
    cpu_limit: null
    cpus: null
    data_volume: null
    hide_links: false
    id: n0
    image_definition: null
    label: Host
    node_definition: iosv
    parameters: {}
    ram: null
    tags: []
    x: -360
    y: 80
    interfaces:
      - id: i0
        label: Loopback0
        type: loopback
      - id: i1
        label: GigabitEthernet0/0
        slot: 0
        type: physical
      - id: i2
        label: GigabitEthernet0/1
        slot: 1
        type: physical
      - id: i3
        label: GigabitEthernet0/2
        slot: 2
        type: physical
      - id: i4
        label: GigabitEthernet0/3
        slot: 3
        type: physical
  - boot_disk_size: null
    configuration:
      - name: ios_config.txt
        content: |-
          Building configuration...

          Current configuration : 3309 bytes
          !
          ! Last configuration change at 18:15:41 UTC Mon Apr 28 2025
          !
          version 15.9
          service timestamps debug datetime msec
          service timestamps log datetime msec
          no service password-encryption
          !
          hostname R1
          !
          boot-start-marker
          boot-end-marker
          !
          !
          no logging console
          !
          no aaa new-model
          !
          !
          !
          mmi polling-interval 60
          no mmi auto-configure
          no mmi pvc
          mmi snmp-timeout 180
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          no ip domain lookup
          ip cef
          no ipv6 cef
          !
          multilink bundle-name authenticated
          !
          !
          !
          !
          !
          redundancy
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          interface GigabitEthernet0/0
           description ** to Host **
           ip address 10.1.0.2 255.255.255.252
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/1
           description ** to R2 **
           ip address 10.1.1.2 255.255.255.252
           ip ospf network point-to-point
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/2
           description ** to R3 **
           ip address 10.1.2.2 255.255.255.252
           ip ospf network point-to-point
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/3
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          router ospf 10
           router-id 1.1.1.1
           passive-interface GigabitEthernet0/0
           network 10.1.0.0 0.0.255.255 area 0
          !
          ip forward-protocol nd
          !
          !
          no ip http server
          no ip http secure-server
          !
          ipv6 ioam timestamp
          !
          !
          !
          control-plane
          !
          banner exec ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner incoming ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner login ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          !
          line con 0
           exec-timeout 0 0
           escape-character 81
          line aux 0
          line vty 0 4
           exec-timeout 0 0
           login
           transport input none
          !
          no scheduler allocate
          !
          end
    cpu_limit: null
    cpus: null
    data_volume: null
    hide_links: false
    id: n1
    image_definition: null
    label: R1
    node_definition: iosv
    parameters: {}
    ram: null
    tags: []
    x: -240
    y: 80
    interfaces:
      - id: i0
        label: Loopback0
        type: loopback
      - id: i1
        label: GigabitEthernet0/0
        slot: 0
        type: physical
      - id: i2
        label: GigabitEthernet0/1
        slot: 1
        type: physical
      - id: i3
        label: GigabitEthernet0/2
        slot: 2
        type: physical
      - id: i4
        label: GigabitEthernet0/3
        slot: 3
        type: physical
  - boot_disk_size: null
    configuration:
      - name: ios_config.txt
        content: |-
          Building configuration...

          Current configuration : 3373 bytes
          !
          ! Last configuration change at 18:15:41 UTC Mon Apr 28 2025
          !
          version 15.9
          service timestamps debug datetime msec
          service timestamps log datetime msec
          no service password-encryption
          !
          hostname R2
          !
          boot-start-marker
          boot-end-marker
          !
          !
          no logging console
          !
          no aaa new-model
          !
          !
          !
          mmi polling-interval 60
          no mmi auto-configure
          no mmi pvc
          mmi snmp-timeout 180
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          no ip domain lookup
          ip cef
          no ipv6 cef
          !
          multilink bundle-name authenticated
          !
          !
          !
          !
          !
          redundancy
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          interface GigabitEthernet0/0
           description ** to R1 **
           ip address 10.1.1.1 255.255.255.252
           ip ospf network point-to-point
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/1
           description ** to R4 **
           ip address 10.0.1.1 255.255.255.252
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/2
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/3
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          router ospf 10
           router-id 2.2.2.2
           network 10.1.0.0 0.0.255.255 area 0
           default-information originate
          !
          router bgp 65001
           bgp router-id 2.2.2.2
           bgp log-neighbor-changes
           network 10.1.0.0 mask 255.255.255.252
           neighbor 10.0.1.2 remote-as 65002
          !
          ip forward-protocol nd
          !
          !
          no ip http server
          no ip http secure-server
          !
          ipv6 ioam timestamp
          !
          !
          !
          control-plane
          !
          banner exec ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner incoming ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner login ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          !
          line con 0
           exec-timeout 0 0
           escape-character 81
          line aux 0
          line vty 0 4
           exec-timeout 0 0
           login
           transport input none
          !
          no scheduler allocate
          !
          end
    cpu_limit: null
    cpus: null
    data_volume: null
    hide_links: false
    id: n2
    image_definition: null
    label: R2
    node_definition: iosv
    parameters: {}
    ram: null
    tags: []
    x: -120
    y: 0
    interfaces:
      - id: i0
        label: Loopback0
        type: loopback
      - id: i1
        label: GigabitEthernet0/0
        slot: 0
        type: physical
      - id: i2
        label: GigabitEthernet0/1
        slot: 1
        type: physical
      - id: i3
        label: GigabitEthernet0/2
        slot: 2
        type: physical
      - id: i4
        label: GigabitEthernet0/3
        slot: 3
        type: physical
  - boot_disk_size: null
    configuration:
      - name: ios_config.txt
        content: |-
          Building configuration...

          Current configuration : 3383 bytes
          !
          ! Last configuration change at 18:15:41 UTC Mon Apr 28 2025
          !
          version 15.9
          service timestamps debug datetime msec
          service timestamps log datetime msec
          no service password-encryption
          !
          hostname R3
          !
          boot-start-marker
          boot-end-marker
          !
          !
          no logging console
          !
          no aaa new-model
          !
          !
          !
          mmi polling-interval 60
          no mmi auto-configure
          no mmi pvc
          mmi snmp-timeout 180
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          no ip domain lookup
          ip cef
          no ipv6 cef
          !
          multilink bundle-name authenticated
          !
          !
          !
          !
          !
          redundancy
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          interface GigabitEthernet0/0
           description ** to R1 **
           ip address 10.1.2.1 255.255.255.252
           ip ospf network point-to-point
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/1
           description ** to R4 **
           ip address 10.0.2.1 255.255.255.252
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/2
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/3
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          router ospf 10
           router-id 3.3.3.3
           network 10.1.0.0 0.0.255.255 area 0
           default-information originate metric 10
          !
          router bgp 65001
           bgp router-id 3.3.3.3
           bgp log-neighbor-changes
           network 10.1.0.0 mask 255.255.255.252
           neighbor 10.0.2.2 remote-as 65002
          !
          ip forward-protocol nd
          !
          !
          no ip http server
          no ip http secure-server
          !
          ipv6 ioam timestamp
          !
          !
          !
          control-plane
          !
          banner exec ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner incoming ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner login ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          !
          line con 0
           exec-timeout 0 0
           escape-character 81
          line aux 0
          line vty 0 4
           exec-timeout 0 0
           login
           transport input none
          !
          no scheduler allocate
          !
          end
    cpu_limit: null
    cpus: null
    data_volume: null
    hide_links: false
    id: n3
    image_definition: null
    label: R3
    node_definition: iosv
    parameters: {}
    ram: null
    tags: []
    x: -120
    y: 160
    interfaces:
      - id: i0
        label: Loopback0
        type: loopback
      - id: i1
        label: GigabitEthernet0/0
        slot: 0
        type: physical
      - id: i2
        label: GigabitEthernet0/1
        slot: 1
        type: physical
      - id: i3
        label: GigabitEthernet0/2
        slot: 2
        type: physical
      - id: i4
        label: GigabitEthernet0/3
        slot: 3
        type: physical
  - boot_disk_size: null
    configuration:
      - name: ios_config.txt
        content: |-
          Building configuration...

          Current configuration : 3346 bytes
          !
          ! Last configuration change at 18:15:41 UTC Mon Apr 28 2025
          !
          version 15.9
          service timestamps debug datetime msec
          service timestamps log datetime msec
          no service password-encryption
          !
          hostname R4
          !
          boot-start-marker
          boot-end-marker
          !
          !
          no logging console
          !
          no aaa new-model
          !
          !
          !
          mmi polling-interval 60
          no mmi auto-configure
          no mmi pvc
          mmi snmp-timeout 180
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          no ip domain lookup
          ip cef
          no ipv6 cef
          !
          multilink bundle-name authenticated
          !
          !
          !
          !
          !
          redundancy
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          interface GigabitEthernet0/0
           description ** to R2 **
           ip address 10.0.1.2 255.255.255.252
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/1
           description ** to R3 **
           ip address 10.0.2.2 255.255.255.252
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/2
           description ** to Server **
           ip address 10.2.0.2 255.255.255.0
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/3
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          router bgp 65002
           bgp router-id 4.4.4.4
           bgp log-neighbor-changes
           neighbor 10.0.1.1 remote-as 65001
           neighbor 10.0.1.1 default-originate
           neighbor 10.0.2.1 remote-as 65001
           neighbor 10.0.2.1 default-originate
          !
          ip forward-protocol nd
          !
          !
          no ip http server
          no ip http secure-server
          !
          ipv6 ioam timestamp
          !
          !
          !
          control-plane
          !
          banner exec ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner incoming ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner login ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          !
          line con 0
           exec-timeout 0 0
           escape-character 81
          line aux 0
          line vty 0 4
           exec-timeout 0 0
           login
           transport input none
          !
          no scheduler allocate
          !
          end
    cpu_limit: null
    cpus: null
    data_volume: null
    hide_links: false
    id: n4
    image_definition: null
    label: R4
    node_definition: iosv
    parameters: {}
    ram: null
    tags: []
    x: 0
    y: 80
    interfaces:
      - id: i0
        label: Loopback0
        type: loopback
      - id: i1
        label: GigabitEthernet0/0
        slot: 0
        type: physical
      - id: i2
        label: GigabitEthernet0/1
        slot: 1
        type: physical
      - id: i3
        label: GigabitEthernet0/2
        slot: 2
        type: physical
      - id: i4
        label: GigabitEthernet0/3
        slot: 3
        type: physical
  - boot_disk_size: null
    configuration:
      - name: ios_config.txt
        content: |-
          Building configuration...

          Current configuration : 3115 bytes
          !
          ! Last configuration change at 18:15:41 UTC Mon Apr 28 2025
          !
          version 15.9
          service timestamps debug datetime msec
          service timestamps log datetime msec
          no service password-encryption
          !
          hostname Server
          !
          boot-start-marker
          boot-end-marker
          !
          !
          no logging console
          !
          no aaa new-model
          !
          !
          !
          mmi polling-interval 60
          no mmi auto-configure
          no mmi pvc
          mmi snmp-timeout 180
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          no ip domain lookup
          ip cef
          no ipv6 cef
          !
          multilink bundle-name authenticated
          !
          !
          !
          !
          !
          redundancy
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          interface GigabitEthernet0/0
           description ** to R4 **
           ip address 10.2.0.1 255.255.255.252
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/1
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/2
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/3
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          ip forward-protocol nd
          !
          !
          no ip http server
          no ip http secure-server
          ip route 0.0.0.0 0.0.0.0 GigabitEthernet0/0 10.2.0.2
          !
          ipv6 ioam timestamp
          !
          !
          !
          control-plane
          !
          banner exec ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner incoming ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner login ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          !
          line con 0
           exec-timeout 0 0
           escape-character 81
          line aux 0
          line vty 0 4
           exec-timeout 0 0
           login
           transport input none
          !
          no scheduler allocate
          !
          end
    cpu_limit: null
    cpus: null
    data_volume: null
    hide_links: false
    id: n5
    image_definition: null
    label: Server
    node_definition: iosv
    parameters: {}
    ram: null
    tags: []
    x: 120
    y: 80
    interfaces:
      - id: i0
        label: Loopback0
        type: loopback
      - id: i1
        label: GigabitEthernet0/0
        slot: 0
        type: physical
      - id: i2
        label: GigabitEthernet0/1
        slot: 1
        type: physical
      - id: i3
        label: GigabitEthernet0/2
        slot: 2
        type: physical
      - id: i4
        label: GigabitEthernet0/3
        slot: 3
        type: physical
links:
  - id: l0
    n1: n0
    n2: n1
    i1: i1
    i2: i1
    conditioning: {}
    label: Host-GigabitEthernet0/0<->R1-GigabitEthernet0/0
  - id: l1
    n1: n1
    n2: n2
    i1: i2
    i2: i1
    conditioning: {}
    label: R1-GigabitEthernet0/1<->R2-GigabitEthernet0/0
  - id: l2
    n1: n1
    n2: n3
    i1: i3
    i2: i1
    conditioning: {}
    label: R1-GigabitEthernet0/2<->R3-GigabitEthernet0/0
  - id: l3
    n1: n4
    n2: n2
    i1: i1
    i2: i2
    conditioning: {}
    label: R4-GigabitEthernet0/0<->R2-GigabitEthernet0/1
  - id: l4
    n1: n4
    n2: n3
    i1: i2
    i2: i2
    conditioning: {}
    label: R4-GigabitEthernet0/1<->R3-GigabitEthernet0/1
  - id: l5
    n1: n4
    n2: n5
    i1: i3
    i2: i1
    conditioning: {}
    label: R4-GigabitEthernet0/2<->Server-GigabitEthernet0/0
lab:
  description: ''
  notes: ''
  title: OSPF default route metric
  version: 0.2.2
