annotations: []
nodes:
  - boot_disk_size: null
    configuration:
      - name: ios_config.txt
        content: |-
          Building configuration...

          Current configuration : 3100 bytes
          !
          ! Last configuration change at 12:06:37 UTC Wed May 14 2025
          !
          version 15.9
          service timestamps debug datetime msec
          service timestamps log datetime msec
          no service password-encryption
          !
          hostname Host1
          !
          boot-start-marker
          boot-end-marker
          !
          !
          no logging console
          !
          no aaa new-model
          !
          !
          !
          mmi polling-interval 60
          no mmi auto-configure
          no mmi pvc
          mmi snmp-timeout 180
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          no ip domain lookup
          ip cef
          no ipv6 cef
          !
          multilink bundle-name authenticated
          !
          !
          !
          !
          !
          redundancy
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          interface GigabitEthernet0/0
           description ** to SW1 **
           ip address 192.168.1.1 255.255.255.0
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/1
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/2
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/3
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          ip forward-protocol nd
          !
          !
          no ip http server
          no ip http secure-server
          ip route 0.0.0.0 0.0.0.0 192.168.1.2
          !
          ipv6 ioam timestamp
          !
          !
          !
          control-plane
          !
          banner exec ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner incoming ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner login ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          !
          line con 0
           exec-timeout 0 0
           escape-character 81
          line aux 0
          line vty 0 4
           exec-timeout 0 0
           login
           transport input none
          !
          no scheduler allocate
          !
          end
    cpu_limit: null
    cpus: null
    data_volume: null
    hide_links: false
    id: n0
    image_definition: null
    label: Host1
    node_definition: iosv
    parameters: {}
    ram: null
    tags: []
    x: -360
    y: 160
    interfaces:
      - id: i0
        label: Loopback0
        type: loopback
      - id: i1
        label: GigabitEthernet0/0
        slot: 0
        type: physical
      - id: i2
        label: GigabitEthernet0/1
        slot: 1
        type: physical
      - id: i3
        label: GigabitEthernet0/2
        slot: 2
        type: physical
      - id: i4
        label: GigabitEthernet0/3
        slot: 3
        type: physical
  - boot_disk_size: null
    configuration:
      - name: ios_config.txt
        content: |-
          Building configuration...

          Current configuration : 3100 bytes
          !
          ! Last configuration change at 12:06:08 UTC Wed May 14 2025
          !
          version 15.9
          service timestamps debug datetime msec
          service timestamps log datetime msec
          no service password-encryption
          !
          hostname Host2
          !
          boot-start-marker
          boot-end-marker
          !
          !
          no logging console
          !
          no aaa new-model
          !
          !
          !
          mmi polling-interval 60
          no mmi auto-configure
          no mmi pvc
          mmi snmp-timeout 180
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          no ip domain lookup
          ip cef
          no ipv6 cef
          !
          multilink bundle-name authenticated
          !
          !
          !
          !
          !
          redundancy
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          interface GigabitEthernet0/0
           description ** to SW2 **
           ip address 192.168.2.1 255.255.255.0
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/1
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/2
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/3
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          ip forward-protocol nd
          !
          !
          no ip http server
          no ip http secure-server
          ip route 0.0.0.0 0.0.0.0 192.168.2.2
          !
          ipv6 ioam timestamp
          !
          !
          !
          control-plane
          !
          banner exec ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner incoming ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner login ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          !
          line con 0
           exec-timeout 0 0
           escape-character 81
          line aux 0
          line vty 0 4
           exec-timeout 0 0
           login
           transport input none
          !
          no scheduler allocate
          !
          end
    cpu_limit: null
    cpus: null
    data_volume: null
    hide_links: false
    id: n1
    image_definition: null
    label: Host2
    node_definition: iosv
    parameters: {}
    ram: null
    tags: []
    x: -200
    y: 160
    interfaces:
      - id: i0
        label: Loopback0
        type: loopback
      - id: i1
        label: GigabitEthernet0/0
        slot: 0
        type: physical
      - id: i2
        label: GigabitEthernet0/1
        slot: 1
        type: physical
      - id: i3
        label: GigabitEthernet0/2
        slot: 2
        type: physical
      - id: i4
        label: GigabitEthernet0/3
        slot: 3
        type: physical
  - boot_disk_size: null
    configuration:
      - name: ios_config.txt
        content: |-
          Building configuration...

          Current configuration : 4013 bytes
          !
          ! Last configuration change at 12:06:16 UTC Wed May 14 2025
          !
          version 15.9
          service timestamps debug datetime msec
          service timestamps log datetime msec
          no service password-encryption
          !
          hostname R1
          !
          boot-start-marker
          boot-end-marker
          !
          !
          no logging console
          !
          no aaa new-model
          !
          !
          !
          mmi polling-interval 60
          no mmi auto-configure
          no mmi pvc
          mmi snmp-timeout 180
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          no ip domain lookup
          ip cef
          no ipv6 cef
          !
          multilink bundle-name authenticated
          !
          !
          !
          !
          !
          redundancy
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          interface Loopback10
           ip address 1.1.1.1 255.255.255.255
          !
          interface LISP0
          !
          interface LISP0.10
          !
          interface GigabitEthernet0/0
           description ** to SW1 **
           no ip address
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/0.10
           description ** to SW1 in VLAN 10 **
           encapsulation dot1Q 10
           ip address 192.168.1.2 255.255.255.0
          !
          interface GigabitEthernet0/1
           description ** to SW2 **
           no ip address
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/1.20
           description ** to SW2 in VLAN 20 **
           encapsulation dot1Q 20
           ip address 192.168.2.2 255.255.255.0
          !
          interface GigabitEthernet0/2
           description ** to R2 **
           ip address 10.1.0.1 255.255.255.252
           ip router isis
           duplex auto
           speed auto
           media-type rj45
           isis circuit-type level-2-only
           isis network point-to-point
          !
          interface GigabitEthernet0/3
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          router lisp
           eid-table default instance-id 10
            database-mapping 192.168.1.0/24 1.1.1.1 priority 1 weight 100
            database-mapping 192.168.2.0/24 1.1.1.1 priority 1 weight 100
            ipv4 use-petr 5.5.5.5
            ipv4 itr map-resolver 6.6.6.6
            ipv4 itr
            ipv4 etr map-server 6.6.6.6 key p4ssw0rd.123
            ipv4 etr
            exit
           !
           exit
          !
          router isis
           net 49.0010.0000.0000.0001.00
           is-type level-2-only
           advertise passive-only
           metric-style wide
           log-adjacency-changes
           passive-interface Loopback10
          !
          ip forward-protocol nd
          !
          !
          no ip http server
          no ip http secure-server
          !
          ipv6 ioam timestamp
          !
          !
          !
          control-plane
          !
          banner exec ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner incoming ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner login ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          !
          line con 0
           exec-timeout 0 0
           escape-character 81
          line aux 0
          line vty 0 4
           exec-timeout 0 0
           login
           transport input none
          !
          no scheduler allocate
          !
          end
    cpu_limit: null
    cpus: null
    data_volume: null
    hide_links: false
    id: n2
    image_definition: null
    label: R1
    node_definition: iosv
    parameters: {}
    ram: null
    tags: []
    x: -280
    y: 0
    interfaces:
      - id: i0
        label: Loopback0
        type: loopback
      - id: i1
        label: GigabitEthernet0/0
        slot: 0
        type: physical
      - id: i2
        label: GigabitEthernet0/1
        slot: 1
        type: physical
      - id: i3
        label: GigabitEthernet0/2
        slot: 2
        type: physical
      - id: i4
        label: GigabitEthernet0/3
        slot: 3
        type: physical
  - boot_disk_size: null
    configuration:
      - name: ios_config.txt
        content: |-
          Building configuration...

          Current configuration : 3479 bytes
          !
          ! Last configuration change at 12:06:13 UTC Wed May 14 2025
          !
          version 15.9
          service timestamps debug datetime msec
          service timestamps log datetime msec
          no service password-encryption
          !
          hostname R2
          !
          boot-start-marker
          boot-end-marker
          !
          !
          no logging console
          !
          no aaa new-model
          !
          !
          !
          mmi polling-interval 60
          no mmi auto-configure
          no mmi pvc
          mmi snmp-timeout 180
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          no ip domain lookup
          ip cef
          no ipv6 cef
          !
          multilink bundle-name authenticated
          !
          !
          !
          !
          !
          redundancy
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          interface Loopback10
           ip address 2.2.2.2 255.255.255.255
          !
          interface GigabitEthernet0/0
           description ** to xTR R1 **
           ip address 10.1.0.2 255.255.255.252
           ip router isis
           duplex auto
           speed auto
           media-type rj45
           isis circuit-type level-2-only
           isis network point-to-point
          !
          interface GigabitEthernet0/1
           description ** to R3 **
           ip address 10.2.0.1 255.255.255.252
           ip router isis
           duplex auto
           speed auto
           media-type rj45
           isis circuit-type level-2-only
           isis network point-to-point
          !
          interface GigabitEthernet0/2
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/3
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          router isis
           net 49.0010.0000.0000.0002.00
           is-type level-2-only
           advertise passive-only
           metric-style wide
           log-adjacency-changes
           passive-interface Loopback10
          !
          ip forward-protocol nd
          !
          !
          no ip http server
          no ip http secure-server
          !
          ipv6 ioam timestamp
          !
          !
          !
          control-plane
          !
          banner exec ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner incoming ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner login ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          !
          line con 0
           exec-timeout 0 0
           escape-character 81
          line aux 0
          line vty 0 4
           exec-timeout 0 0
           login
           transport input none
          !
          no scheduler allocate
          !
          end
    cpu_limit: null
    cpus: null
    data_volume: null
    hide_links: false
    id: n3
    image_definition: null
    label: R2
    node_definition: iosv
    parameters: {}
    ram: null
    tags: []
    x: -280
    y: -120
    interfaces:
      - id: i0
        label: Loopback0
        type: loopback
      - id: i1
        label: GigabitEthernet0/0
        slot: 0
        type: physical
      - id: i2
        label: GigabitEthernet0/1
        slot: 1
        type: physical
      - id: i3
        label: GigabitEthernet0/2
        slot: 2
        type: physical
      - id: i4
        label: GigabitEthernet0/3
        slot: 3
        type: physical
  - boot_disk_size: null
    configuration:
      - name: ios_config.txt
        content: |-
          Building configuration...

          Current configuration : 3591 bytes
          !
          ! Last configuration change at 12:06:18 UTC Wed May 14 2025
          !
          version 15.9
          service timestamps debug datetime msec
          service timestamps log datetime msec
          no service password-encryption
          !
          hostname R3
          !
          boot-start-marker
          boot-end-marker
          !
          !
          no logging console
          !
          no aaa new-model
          !
          !
          !
          mmi polling-interval 60
          no mmi auto-configure
          no mmi pvc
          mmi snmp-timeout 180
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          no ip domain lookup
          ip cef
          no ipv6 cef
          !
          multilink bundle-name authenticated
          !
          !
          !
          !
          !
          redundancy
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          interface Loopback10
           ip address 3.3.3.3 255.255.255.255
          !
          interface GigabitEthernet0/0
           description ** to R2 **
           ip address 10.2.0.2 255.255.255.252
           ip router isis
           duplex auto
           speed auto
           media-type rj45
           isis circuit-type level-2-only
           isis network point-to-point
          !
          interface GigabitEthernet0/1
           description ** to R4 **
           ip address 10.3.0.1 255.255.255.252
           ip router isis
           duplex auto
           speed auto
           media-type rj45
           isis circuit-type level-2-only
           isis network point-to-point
          !
          interface GigabitEthernet0/2
           description ** to R6 **
           ip address 10.5.0.1 255.255.255.252
           ip router isis
           duplex auto
           speed auto
           media-type rj45
           isis circuit-type level-2-only
           isis network point-to-point
          !
          interface GigabitEthernet0/3
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          router isis
           net 49.0010.0000.0000.0003.00
           is-type level-2-only
           advertise passive-only
           metric-style wide
           log-adjacency-changes
           passive-interface Loopback10
          !
          ip forward-protocol nd
          !
          !
          no ip http server
          no ip http secure-server
          !
          ipv6 ioam timestamp
          !
          !
          !
          control-plane
          !
          banner exec ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner incoming ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner login ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          !
          line con 0
           exec-timeout 0 0
           escape-character 81
          line aux 0
          line vty 0 4
           exec-timeout 0 0
           login
           transport input none
          !
          no scheduler allocate
          !
          end
    cpu_limit: null
    cpus: null
    data_volume: null
    hide_links: false
    id: n4
    image_definition: null
    label: R3
    node_definition: iosv
    parameters: {}
    ram: null
    tags: []
    x: -80
    y: -120
    interfaces:
      - id: i0
        label: Loopback0
        type: loopback
      - id: i1
        label: GigabitEthernet0/0
        slot: 0
        type: physical
      - id: i2
        label: GigabitEthernet0/1
        slot: 1
        type: physical
      - id: i3
        label: GigabitEthernet0/2
        slot: 2
        type: physical
      - id: i4
        label: GigabitEthernet0/3
        slot: 3
        type: physical
  - boot_disk_size: null
    configuration:
      - name: ios_config.txt
        content: |-
          Building configuration...

          Current configuration : 3475 bytes
          !
          ! Last configuration change at 12:06:13 UTC Wed May 14 2025
          !
          version 15.9
          service timestamps debug datetime msec
          service timestamps log datetime msec
          no service password-encryption
          !
          hostname R4
          !
          boot-start-marker
          boot-end-marker
          !
          !
          no logging console
          !
          no aaa new-model
          !
          !
          !
          mmi polling-interval 60
          no mmi auto-configure
          no mmi pvc
          mmi snmp-timeout 180
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          no ip domain lookup
          ip cef
          no ipv6 cef
          !
          multilink bundle-name authenticated
          !
          !
          !
          !
          !
          redundancy
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          interface Loopback10
           ip address 4.4.4.4 255.255.255.255
          !
          interface GigabitEthernet0/0
           description to ** R5 **
           ip address 10.4.0.2 255.255.255.252
           ip router isis
           duplex auto
           speed auto
           media-type rj45
           isis circuit-type level-2-only
           isis network point-to-point
          !
          interface GigabitEthernet0/1
           description to ** R3 **
           ip address 10.3.0.2 255.255.255.252
           ip router isis
           duplex auto
           speed auto
           media-type rj45
           isis circuit-type level-2-only
           isis network point-to-point
          !
          interface GigabitEthernet0/2
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/3
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          router isis
           net 49.0010.0000.0000.0004.00
           is-type level-2-only
           advertise passive-only
           metric-style wide
           log-adjacency-changes
           passive-interface Loopback10
          !
          ip forward-protocol nd
          !
          !
          no ip http server
          no ip http secure-server
          !
          ipv6 ioam timestamp
          !
          !
          !
          control-plane
          !
          banner exec ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner incoming ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner login ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          !
          line con 0
           exec-timeout 0 0
           escape-character 81
          line aux 0
          line vty 0 4
           exec-timeout 0 0
           login
           transport input none
          !
          no scheduler allocate
          !
          end
    cpu_limit: null
    cpus: null
    data_volume: null
    hide_links: false
    id: n5
    image_definition: null
    label: R4
    node_definition: iosv
    parameters: {}
    ram: null
    tags: []
    x: 120
    y: -120
    interfaces:
      - id: i0
        label: Loopback0
        type: loopback
      - id: i1
        label: GigabitEthernet0/0
        slot: 0
        type: physical
      - id: i2
        label: GigabitEthernet0/1
        slot: 1
        type: physical
      - id: i3
        label: GigabitEthernet0/2
        slot: 2
        type: physical
      - id: i4
        label: GigabitEthernet0/3
        slot: 3
        type: physical
  - boot_disk_size: null
    configuration:
      - name: ios_config.txt
        content: |-
          Building configuration...

          Current configuration : 3557 bytes
          !
          ! Last configuration change at 12:06:22 UTC Wed May 14 2025
          !
          version 15.9
          service timestamps debug datetime msec
          service timestamps log datetime msec
          no service password-encryption
          !
          hostname R6
          !
          boot-start-marker
          boot-end-marker
          !
          !
          no logging console
          !
          no aaa new-model
          !
          !
          !
          mmi polling-interval 60
          no mmi auto-configure
          no mmi pvc
          mmi snmp-timeout 180
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          no ip domain lookup
          ip cef
          no ipv6 cef
          !
          multilink bundle-name authenticated
          !
          !
          !
          !
          !
          redundancy
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          interface Loopback10
           ip address 6.6.6.6 255.255.255.255
          !
          interface GigabitEthernet0/0
           description ** to R3 **
           ip address 10.5.0.2 255.255.255.252
           ip router isis
           duplex auto
           speed auto
           media-type rj45
           isis circuit-type level-2-only
           isis network point-to-point
          !
          interface GigabitEthernet0/1
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/2
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/3
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          router lisp
           site Site1
            authentication-key p4ssw0rd.123
            eid-prefix instance-id 10 192.168.1.0/24
            eid-prefix instance-id 10 192.168.2.0/24
            exit
           !
           ipv4 map-server
           ipv4 map-resolver
           exit
          !
          router isis
           net 49.0010.0000.0000.0006.00
           is-type level-2-only
           advertise passive-only
           metric-style wide
           log-adjacency-changes
           passive-interface Loopback10
          !
          ip forward-protocol nd
          !
          !
          no ip http server
          no ip http secure-server
          !
          ipv6 ioam timestamp
          !
          !
          !
          control-plane
          !
          banner exec ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner incoming ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner login ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          !
          line con 0
           exec-timeout 0 0
           escape-character 81
          line aux 0
          line vty 0 4
           exec-timeout 0 0
           login
           transport input none
          !
          no scheduler allocate
          !
          end
    cpu_limit: null
    cpus: null
    data_volume: null
    hide_links: false
    id: n6
    image_definition: null
    label: R6
    node_definition: iosv
    parameters: {}
    ram: null
    tags: []
    x: -80
    y: -40
    interfaces:
      - id: i0
        label: Loopback0
        type: loopback
      - id: i1
        label: GigabitEthernet0/0
        slot: 0
        type: physical
      - id: i2
        label: GigabitEthernet0/1
        slot: 1
        type: physical
      - id: i3
        label: GigabitEthernet0/2
        slot: 2
        type: physical
      - id: i4
        label: GigabitEthernet0/3
        slot: 3
        type: physical
  - boot_disk_size: null
    configuration:
      - name: ios_config.txt
        content: |-
          Building configuration...

          Current configuration : 3734 bytes
          !
          ! Last configuration change at 12:06:13 UTC Wed May 14 2025
          !
          version 15.9
          service timestamps debug datetime msec
          service timestamps log datetime msec
          no service password-encryption
          !
          hostname R5
          !
          boot-start-marker
          boot-end-marker
          !
          !
          no logging console
          !
          no aaa new-model
          !
          !
          !
          mmi polling-interval 60
          no mmi auto-configure
          no mmi pvc
          mmi snmp-timeout 180
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          no ip domain lookup
          ip cef
          no ipv6 cef
          !
          multilink bundle-name authenticated
          !
          !
          !
          !
          !
          redundancy
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          interface Loopback10
           ip address 5.5.5.5 255.255.255.255
          !
          interface LISP0
          !
          interface LISP0.10
          !
          interface GigabitEthernet0/0
           description ** to SW3 **
           no ip address
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/0.10
           description ** to SW3 in VLAN 30 **
           encapsulation dot1Q 30
           ip address 192.168.3.2 255.255.255.0
          !
          interface GigabitEthernet0/1
           description ** to R4 **
           ip address 10.4.0.1 255.255.255.252
           ip router isis
           duplex auto
           speed auto
           media-type rj45
           isis circuit-type level-2-only
           isis network point-to-point
          !
          interface GigabitEthernet0/2
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/3
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          router lisp
           eid-table default instance-id 10
            map-cache 0.0.0.0/0 map-request
            ipv4 proxy-etr
            ipv4 proxy-itr 5.5.5.5
            ipv4 etr map-server 6.6.6.6 key p4ssw0rd.123
            exit
           !
           exit
          !
          router isis
           net 49.0010.0000.0000.0005.00
           is-type level-2-only
           advertise passive-only
           metric-style wide
           log-adjacency-changes
           passive-interface Loopback10
          !
          ip forward-protocol nd
          !
          !
          no ip http server
          no ip http secure-server
          !
          ipv6 ioam timestamp
          !
          !
          !
          control-plane
          !
          banner exec ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner incoming ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner login ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          !
          line con 0
           exec-timeout 0 0
           escape-character 81
          line aux 0
          line vty 0 4
           exec-timeout 0 0
           login
           transport input none
          !
          no scheduler allocate
          !
          end
    cpu_limit: null
    cpus: null
    data_volume: null
    hide_links: false
    id: n7
    image_definition: null
    label: R5
    node_definition: iosv
    parameters: {}
    ram: null
    tags: []
    x: 120
    y: 0
    interfaces:
      - id: i0
        label: Loopback0
        type: loopback
      - id: i1
        label: GigabitEthernet0/0
        slot: 0
        type: physical
      - id: i2
        label: GigabitEthernet0/1
        slot: 1
        type: physical
      - id: i3
        label: GigabitEthernet0/2
        slot: 2
        type: physical
      - id: i4
        label: GigabitEthernet0/3
        slot: 3
        type: physical
  - boot_disk_size: null
    configuration:
      - name: ios_config.txt
        content: |-
          Building configuration...

          Current configuration : 3100 bytes
          !
          ! Last configuration change at 12:06:35 UTC Wed May 14 2025
          !
          version 15.9
          service timestamps debug datetime msec
          service timestamps log datetime msec
          no service password-encryption
          !
          hostname Host3
          !
          boot-start-marker
          boot-end-marker
          !
          !
          no logging console
          !
          no aaa new-model
          !
          !
          !
          mmi polling-interval 60
          no mmi auto-configure
          no mmi pvc
          mmi snmp-timeout 180
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          no ip domain lookup
          ip cef
          no ipv6 cef
          !
          multilink bundle-name authenticated
          !
          !
          !
          !
          !
          redundancy
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          interface GigabitEthernet0/0
           description ** to SW3 **
           ip address 192.168.3.1 255.255.255.0
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/1
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/2
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          interface GigabitEthernet0/3
           no ip address
           shutdown
           duplex auto
           speed auto
           media-type rj45
          !
          ip forward-protocol nd
          !
          !
          no ip http server
          no ip http secure-server
          ip route 0.0.0.0 0.0.0.0 192.168.3.2
          !
          ipv6 ioam timestamp
          !
          !
          !
          control-plane
          !
          banner exec ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner incoming ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          banner login ^C
          **************************************************************************
          * IOSv is strictly limited to use for evaluation, demonstration and IOS  *
          * education. IOSv is provided as-is and is not supported by Cisco's      *
          * Technical Advisory Center. Any use or disclosure, in whole or in part, *
          * of the IOSv Software or Documentation to any third party for any       *
          * purposes is expressly prohibited except as otherwise authorized by     *
          * Cisco in writing.                                                      *
          **************************************************************************^C
          !
          line con 0
           exec-timeout 0 0
           escape-character 81
          line aux 0
          line vty 0 4
           exec-timeout 0 0
           login
           transport input none
          !
          no scheduler allocate
          !
          end
    cpu_limit: null
    cpus: null
    data_volume: null
    hide_links: false
    id: n8
    image_definition: null
    label: Host3
    node_definition: iosv
    parameters: {}
    ram: null
    tags: []
    x: 120
    y: 160
    interfaces:
      - id: i0
        label: Loopback0
        type: loopback
      - id: i1
        label: GigabitEthernet0/0
        slot: 0
        type: physical
      - id: i2
        label: GigabitEthernet0/1
        slot: 1
        type: physical
      - id: i3
        label: GigabitEthernet0/2
        slot: 2
        type: physical
      - id: i4
        label: GigabitEthernet0/3
        slot: 3
        type: physical
  - boot_disk_size: null
    configuration:
      - name: ios_config.txt
        content: |-
          Building configuration...

          Current configuration : 2921 bytes
          !
          ! Last configuration change at 12:05:57 UTC Wed May 14 2025
          !
          version 15.2
          service timestamps debug datetime msec
          service timestamps log datetime msec
          no service password-encryption
          service compress-config
          !
          hostname SW1
          !
          boot-start-marker
          boot-end-marker
          !
          !
          no logging console
          !
          no aaa new-model
          !
          !
          !
          !
          !
          !
          !
          !
          no ip domain-lookup
          ip cef
          no ipv6 cef
          !
          !
          !
          spanning-tree mode pvst
          spanning-tree extend system-id
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          interface GigabitEthernet0/0
           description ** to Host1 **
           switchport access vlan 10
           switchport mode access
           negotiation auto
          !
          interface GigabitEthernet0/1
           description ** to xTR R1 **
           switchport trunk allowed vlan 10
           switchport trunk encapsulation dot1q
           switchport mode trunk
           negotiation auto
          !
          interface GigabitEthernet0/2
           negotiation auto
          !
          interface GigabitEthernet0/3
           negotiation auto
          !
          ip forward-protocol nd
          !
          ip http server
          ip http secure-server
          !
          ip ssh server algorithm encryption aes128-ctr aes192-ctr aes256-ctr
          ip ssh client algorithm encryption aes128-ctr aes192-ctr aes256-ctr
          !
          !
          !
          !
          !
          !
          control-plane
          !
          banner exec ^C
          IOSv - Cisco Systems Confidential -

          Supplemental End User License Restrictions

          This IOSv software is provided AS-IS without warranty of any kind. Under no circumstances may this software be used separate from the Cisco Modeling Labs Software that this software was provided with, or deployed or used as part of a production environment.

          By using the software, you agree to abide by the terms and conditions of the Cisco End User License Agreement at http://www.cisco.com/go/eula. Unauthorized use or distribution of this software is expressly prohibited.
          ^C
          banner incoming ^C
          IOSv - Cisco Systems Confidential -

          Supplemental End User License Restrictions

          This IOSv software is provided AS-IS without warranty of any kind. Under no circumstances may this software be used separate from the Cisco Modeling Labs Software that this software was provided with, or deployed or used as part of a production environment.

          By using the software, you agree to abide by the terms and conditions of the Cisco End User License Agreement at http://www.cisco.com/go/eula. Unauthorized use or distribution of this software is expressly prohibited.
          ^C
          banner login ^C
          IOSv - Cisco Systems Confidential -

          Supplemental End User License Restrictions

          This IOSv software is provided AS-IS without warranty of any kind. Under no circumstances may this software be used separate from the Cisco Modeling Labs Software that this software was provided with, or deployed or used as part of a production environment.

          By using the software, you agree to abide by the terms and conditions of the Cisco End User License Agreement at http://www.cisco.com/go/eula. Unauthorized use or distribution of this software is expressly prohibited.
          ^C
          !
          line con 0
           exec-timeout 0 0
           escape-character 81
          line aux 0
          line vty 0 4
           exec-timeout 0 0
           login
          !
          !
          end
    cpu_limit: null
    cpus: null
    data_volume: null
    hide_links: false
    id: n9
    image_definition: null
    label: SW1
    node_definition: iosvl2
    parameters: {}
    ram: null
    tags: []
    x: -360
    y: 80
    interfaces:
      - id: i0
        label: Loopback0
        type: loopback
      - id: i1
        label: GigabitEthernet0/0
        slot: 0
        type: physical
      - id: i2
        label: GigabitEthernet0/1
        slot: 1
        type: physical
      - id: i3
        label: GigabitEthernet0/2
        slot: 2
        type: physical
      - id: i4
        label: GigabitEthernet0/3
        slot: 3
        type: physical
  - boot_disk_size: null
    configuration:
      - name: ios_config.txt
        content: |-
          Building configuration...

          Current configuration : 2921 bytes
          !
          ! Last configuration change at 12:06:26 UTC Wed May 14 2025
          !
          version 15.2
          service timestamps debug datetime msec
          service timestamps log datetime msec
          no service password-encryption
          service compress-config
          !
          hostname SW2
          !
          boot-start-marker
          boot-end-marker
          !
          !
          no logging console
          !
          no aaa new-model
          !
          !
          !
          !
          !
          !
          !
          !
          no ip domain-lookup
          ip cef
          no ipv6 cef
          !
          !
          !
          spanning-tree mode pvst
          spanning-tree extend system-id
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          interface GigabitEthernet0/0
           description ** to Host2 **
           switchport access vlan 20
           switchport mode access
           negotiation auto
          !
          interface GigabitEthernet0/1
           description ** to xTR R1 **
           switchport trunk allowed vlan 20
           switchport trunk encapsulation dot1q
           switchport mode trunk
           negotiation auto
          !
          interface GigabitEthernet0/2
           negotiation auto
          !
          interface GigabitEthernet0/3
           negotiation auto
          !
          ip forward-protocol nd
          !
          ip http server
          ip http secure-server
          !
          ip ssh server algorithm encryption aes128-ctr aes192-ctr aes256-ctr
          ip ssh client algorithm encryption aes128-ctr aes192-ctr aes256-ctr
          !
          !
          !
          !
          !
          !
          control-plane
          !
          banner exec ^C
          IOSv - Cisco Systems Confidential -

          Supplemental End User License Restrictions

          This IOSv software is provided AS-IS without warranty of any kind. Under no circumstances may this software be used separate from the Cisco Modeling Labs Software that this software was provided with, or deployed or used as part of a production environment.

          By using the software, you agree to abide by the terms and conditions of the Cisco End User License Agreement at http://www.cisco.com/go/eula. Unauthorized use or distribution of this software is expressly prohibited.
          ^C
          banner incoming ^C
          IOSv - Cisco Systems Confidential -

          Supplemental End User License Restrictions

          This IOSv software is provided AS-IS without warranty of any kind. Under no circumstances may this software be used separate from the Cisco Modeling Labs Software that this software was provided with, or deployed or used as part of a production environment.

          By using the software, you agree to abide by the terms and conditions of the Cisco End User License Agreement at http://www.cisco.com/go/eula. Unauthorized use or distribution of this software is expressly prohibited.
          ^C
          banner login ^C
          IOSv - Cisco Systems Confidential -

          Supplemental End User License Restrictions

          This IOSv software is provided AS-IS without warranty of any kind. Under no circumstances may this software be used separate from the Cisco Modeling Labs Software that this software was provided with, or deployed or used as part of a production environment.

          By using the software, you agree to abide by the terms and conditions of the Cisco End User License Agreement at http://www.cisco.com/go/eula. Unauthorized use or distribution of this software is expressly prohibited.
          ^C
          !
          line con 0
           exec-timeout 0 0
           escape-character 81
          line aux 0
          line vty 0 4
           exec-timeout 0 0
           login
          !
          !
          end
    cpu_limit: null
    cpus: null
    data_volume: null
    hide_links: false
    id: n10
    image_definition: null
    label: SW2
    node_definition: iosvl2
    parameters: {}
    ram: null
    tags: []
    x: -200
    y: 80
    interfaces:
      - id: i0
        label: Loopback0
        type: loopback
      - id: i1
        label: GigabitEthernet0/0
        slot: 0
        type: physical
      - id: i2
        label: GigabitEthernet0/1
        slot: 1
        type: physical
      - id: i3
        label: GigabitEthernet0/2
        slot: 2
        type: physical
      - id: i4
        label: GigabitEthernet0/3
        slot: 3
        type: physical
  - boot_disk_size: null
    configuration:
      - name: ios_config.txt
        content: |-
          Building configuration...

          Current configuration : 2921 bytes
          !
          ! Last configuration change at 12:06:28 UTC Wed May 14 2025
          !
          version 15.2
          service timestamps debug datetime msec
          service timestamps log datetime msec
          no service password-encryption
          service compress-config
          !
          hostname SW3
          !
          boot-start-marker
          boot-end-marker
          !
          !
          no logging console
          !
          no aaa new-model
          !
          !
          !
          !
          !
          !
          !
          !
          no ip domain-lookup
          ip cef
          no ipv6 cef
          !
          !
          !
          spanning-tree mode pvst
          spanning-tree extend system-id
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          !
          interface GigabitEthernet0/0
           description ** to Host3 **
           switchport access vlan 30
           switchport mode access
           negotiation auto
          !
          interface GigabitEthernet0/1
           description ** to xTR R5 **
           switchport trunk allowed vlan 30
           switchport trunk encapsulation dot1q
           switchport mode trunk
           negotiation auto
          !
          interface GigabitEthernet0/2
           negotiation auto
          !
          interface GigabitEthernet0/3
           negotiation auto
          !
          ip forward-protocol nd
          !
          ip http server
          ip http secure-server
          !
          ip ssh server algorithm encryption aes128-ctr aes192-ctr aes256-ctr
          ip ssh client algorithm encryption aes128-ctr aes192-ctr aes256-ctr
          !
          !
          !
          !
          !
          !
          control-plane
          !
          banner exec ^C
          IOSv - Cisco Systems Confidential -

          Supplemental End User License Restrictions

          This IOSv software is provided AS-IS without warranty of any kind. Under no circumstances may this software be used separate from the Cisco Modeling Labs Software that this software was provided with, or deployed or used as part of a production environment.

          By using the software, you agree to abide by the terms and conditions of the Cisco End User License Agreement at http://www.cisco.com/go/eula. Unauthorized use or distribution of this software is expressly prohibited.
          ^C
          banner incoming ^C
          IOSv - Cisco Systems Confidential -

          Supplemental End User License Restrictions

          This IOSv software is provided AS-IS without warranty of any kind. Under no circumstances may this software be used separate from the Cisco Modeling Labs Software that this software was provided with, or deployed or used as part of a production environment.

          By using the software, you agree to abide by the terms and conditions of the Cisco End User License Agreement at http://www.cisco.com/go/eula. Unauthorized use or distribution of this software is expressly prohibited.
          ^C
          banner login ^C
          IOSv - Cisco Systems Confidential -

          Supplemental End User License Restrictions

          This IOSv software is provided AS-IS without warranty of any kind. Under no circumstances may this software be used separate from the Cisco Modeling Labs Software that this software was provided with, or deployed or used as part of a production environment.

          By using the software, you agree to abide by the terms and conditions of the Cisco End User License Agreement at http://www.cisco.com/go/eula. Unauthorized use or distribution of this software is expressly prohibited.
          ^C
          !
          line con 0
           exec-timeout 0 0
           escape-character 81
          line aux 0
          line vty 0 4
           exec-timeout 0 0
           login
          !
          !
          end
    cpu_limit: null
    cpus: null
    data_volume: null
    hide_links: false
    id: n11
    image_definition: null
    label: SW3
    node_definition: iosvl2
    parameters: {}
    ram: null
    tags: []
    x: 120
    y: 80
    interfaces:
      - id: i0
        label: Loopback0
        type: loopback
      - id: i1
        label: GigabitEthernet0/0
        slot: 0
        type: physical
      - id: i2
        label: GigabitEthernet0/1
        slot: 1
        type: physical
      - id: i3
        label: GigabitEthernet0/2
        slot: 2
        type: physical
      - id: i4
        label: GigabitEthernet0/3
        slot: 3
        type: physical
links:
  - id: l0
    n1: n0
    n2: n9
    i1: i1
    i2: i1
    conditioning: {}
    label: a-0-GigabitEthernet0/0<->b-0-GigabitEthernet0/0
  - id: l1
    n1: n1
    n2: n10
    i1: i1
    i2: i1
    conditioning: {}
    label: a-1-GigabitEthernet0/0<->b-1-GigabitEthernet0/0
  - id: l2
    n1: n9
    n2: n2
    i1: i2
    i2: i1
    conditioning: {}
    label: b-0-GigabitEthernet0/1<->a-2-GigabitEthernet0/0
  - id: l3
    n1: n10
    n2: n2
    i1: i2
    i2: i2
    conditioning: {}
    label: b-1-GigabitEthernet0/1<->a-2-GigabitEthernet0/1
  - id: l4
    n1: n8
    n2: n11
    i1: i1
    i2: i1
    conditioning: {}
    label: a-8-GigabitEthernet0/0<->b-2-GigabitEthernet0/0
  - id: l5
    n1: n11
    n2: n7
    i1: i2
    i2: i1
    conditioning: {}
    label: b-2-GigabitEthernet0/1<->a-7-GigabitEthernet0/0
  - id: l6
    n1: n2
    n2: n3
    i1: i3
    i2: i1
    conditioning: {}
    label: a-2-GigabitEthernet0/2<->a-3-GigabitEthernet0/0
  - id: l7
    n1: n3
    n2: n4
    i1: i2
    i2: i1
    conditioning: {}
    label: a-3-GigabitEthernet0/1<->a-4-GigabitEthernet0/0
  - id: l8
    n1: n7
    n2: n5
    i1: i2
    i2: i1
    conditioning: {}
    label: a-7-GigabitEthernet0/1<->a-5-GigabitEthernet0/0
  - id: l9
    n1: n4
    n2: n5
    i1: i2
    i2: i2
    conditioning: {}
    label: a-4-GigabitEthernet0/1<->a-5-GigabitEthernet0/1
  - id: l10
    n1: n4
    n2: n6
    i1: i3
    i2: i1
    conditioning: {}
    label: a-4-GigabitEthernet0/2<->a-6-GigabitEthernet0/0
lab:
  description: ''
  notes: ''
  title: LISP with External Site (PxTR)
  version: 0.2.2
